Buhler Inland 2500 Specifications download pdf (Page 14)

bühler

bühlerbühler

bühler

2500 Hayliner

7. Unloading

DANGER Make sure area is clear before unloading. Failure to do so

could result in serious injury or death.

NOTE: Left or right decks can be unloaded individually or together. However, the

pusher moves faster and has more torque when operated individually. Do not run

pushers all the way to the end, the resulting shock load may cause damage to chain

and drive.

 Extend tilt cylinder to raise carrier beams by engaging the tractor’s extension

hydraulics.

 Depress and hold LH and/or RH PUSHER BACK switch to push the bales off the

carrier beam.

 Once the rear bale has been pushed off the carrier, slowly drive forward while

pushing the bales back (unloading) to keep all bale ends in contact.

 When amber reflector on inside of the carrier

beam becomes visible stop the pusher. The

reflector is approximately 26” (66cm) from the

end of the beam.

 Slowly drive forward to unload the last bale.

Retract the tilt cylinder to lower the beam and

begin the next loading cycle.

 Return PUSHER to the front of the 2500

Hayliner to prepare for the next cycle.

AMBER REFLECTOR

LOCATION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 70 71

No comments

Buhler Inland 2500 Specifications Page 14