bühler
bühlerbühler
bühler
2500 Hayliner
22
CAUTION Make sure area is clear of obstructions, well lit, and has
sufficient room for safe assembly.
CAUTION Ensure the 2500 Hayliner tires and hitch are securely block.
Otherwise, verify the 2500 Hayliner is properly coupled to the drawbar on a tractor with
a minimum of 25000 LB (11340 kg).
Center Bale Stop
Remove the hardware that is attached to the center bale stop and place center
bale stop bar on bolt plates in the position shown on page 3. Torque the provided
hardware to the specifications listed on the bolt chart. Tie wrap the hydraulic
hoses that run to the lift and tilt cylinders under the roll bar.
Fixed Lift Arm
NOTE: Hydraulic Assembly methods and layouts are common to the right and left
sides. Only one side of each component is shown in this manual.
CAUTION Stay clear of the arms when testing a finished assembly.
Ensure during assembly to keep your entire body out from underneath parts that are
being attached to the main frame.
Remove lift arm pivot pins that are installed
on the 2500 Hayliner.
Thoroughly lubricate all pins involved in the
assembly with a SAE multi purpose grease.
Align arm to pivots with open end of arm
facing forward and reinstall pins with
hardware provided and torque to
specifications called for in the bolt chart.
Remove the lift cylinder pin from the arm.
36.0"
FIXED LIFT ARM
ATTACHMENT
Align the lift cylinder rod and reinstall the pin.
Adjust the outside bale fork to be positioned at the end of the lift arm and the
inner bale fork about 36” (91 cm) from the end.
Recheck all hardware so that every bolted connection on the lift arm is torqued
according to the specifications of the bolt chart.
For first operation, cycle the lift arm slowly with a bale and Inspect just before
lifting bale from ground.
Approach the bale and inspect to ensure the spacing of the forks is accurate.
Finish the cycle and observe how the bale transits from the forks to the carrier
beam. If transition is smooth with minimum bale binding assembly is completed.
If not adjust the forks to a different location and try until loading is smooth.
(74 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals